What size drill bit do you use for a 1/4 tap?
What Size Drill Bit for 1/4″ 20 Tap?
Screw Size | Drill Bit | Drill Bit Size |
---|---|---|
1/4″ 20 Tap | #7 | 13/64″ |
1/4″ 28 Tap | #3 | 7/32″ |
What is a 1/4 NPT thread?
NPT fittings are listed by the “standard” inner diameter (I.D.) of the fitting. (We put “standard” in quotes because the I.D. of the fitting will vary, depending on the manufacturer.) The outer diameter (O.D.) of the threads is usually about 1/4 (0.250) in.
What size is 1/4 NPT fitting?
NPT and NPTF pipe threads – dimensions according ANSI/ASME B1. 20.1/3.
NPT – American Standard Pipe Thread Taper 1) | ||
---|---|---|
Pipe Size (inches) | TPI | Nominal Outside Diameter Pipe OD (inches) |
1/8″ | 27 | 0.405 |
1/4″ | 18 | 0.540 |
3/8″ | 18 | 0.675 |
What size is a 1 4 NPT?
Basic Dimensions, American National Standard Taper Pipe Threads, NPT, (ANSI B2. 1-1968)
Nominal Pipe Size | Outside Diameter of Pipe | Threads per Inch |
---|---|---|
1/8 | 0.405 | 27 |
1/4 | 0.540 | 18 |
3/8 | 0.675 | 18 |
1/2 | 0.840 | 14 |
What size hole do I drill for a 1/4 NPT tap?
7/16″
NPT Tap Drill Chart
Tap Size | Drill Size | Tap and Drill Set |
---|---|---|
1/4″ NPT Tap | 7/16″ Drill Bit | 1/4″ NPT Tap and Drill Set |
3/8″ NPT Tap | 37/64″ Drill Bit | 3/8″ NPT Tap and Drill Set |
1/2″ NPT Tap | 23/32″ Drill Bit | 1/2″ NPT Tap and Drill Set |
3/4″ NPT Tap | 59/64″ Drill Bit | 3/4″ NPT Tap and Drill Set |
What is NPT thread size?
NPT is defined by ANSI/ASME standard B1. 20.1. The taper rate for all NPT threads is 1 inch of diameter in 16 inches of length ( 3⁄4 inch per foot or 62.5 millimeters per meter) measured by the change of diameter (of the pipe thread) over distance of thread.
What size is a 1/4 NPT?
What is the OD of 1/4 NPT?
Basic Dimensions, American National Standard Taper Pipe Threads, NPT, (ANSI B2. 1-1968)
Nominal Pipe Size | Outside Diameter of Pipe | Height of Thread |
---|---|---|
1/4 | 0.540 | 0.04444 |
3/8 | 0.675 | 0.04444 |
1/2 | 0.840 | 0.05714 |
3/4 | 1.050 | 0.05714 |