Table of Contents

## What is the load center of a forklift?

According to OSHA, “The load center is the distance from the face of the forks to the load’s center of gravity.” It is important for operators and managers to understand the forklift load’s center of gravity in order to operate and transport loads safely in their operations.

### How is forklift load center calculated?

Essentially, a load centre is the middle of a forklift load, when measured front to back. This is calculated by measuring whatever it is you need to lift, then dividing by two (assuming an even load). So, if you have a load that weighs 1,700kg and is 1,000mm long, we can determine that the load centre is 500mm.

#### How do you calculate load center?

Two Load Center Calculations to Know We divide 24″ (standard load center) by 30″ (actual load center) and then multiply it by the standard rated capacity of the forklift (let’s say 6,000 lbs.). We have calculated the new safe capacity.

**Where is the load Centre distance?**

The load centre distance is measured from the vertical face of the forks to the loads centre of gravity.

**What is a load center?**

What is a load center? A load center (i.e., breaker box, fuse box) takes electricity from the utility source and distributes it throughout a facility to support reliable electrical distribution. The distribution of power to the various circuits is protected from over-current by the use of circuit breakers or fuses.

## What is the load capacity of a forklift?

As a general rule, load center is 24″ from the face of the forks (the center point of standard 48” x 48” pallet). Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate.

### What is forklift load capacity?

Forklift capacity is the measurement of how much weight a particular forklift can lift. Lower capacities begin around 3,000 lbs. and can go up to over 50,000 lbs.

#### What is the center of gravity on a forklift?

Forklift Load Stability Terms and Definitions Center of gravity – The point on an object at which all the object’s weight is concentrated. For symmetrical loads, the center of gravity is at the middle of the load. Fulcrum – The forklift’s axis of rotation when it tips over.

**How much can a 3000 lb forklift lift?**

What are the Capacities for Common Forklifts?

Forklift Type | Rated Capacity Range |
---|---|

Forklift TypeElectric Reach Trucks | Rated Capacity Range3,000 lb. — 4,500 lb. |

Forklift TypeElectric Order Pickers | Rated Capacity Range3,000 lb. |

Forklift TypeInternal Combustion Sit-Down Counterbalance | Rated Capacity Range3,000 lb. — 158,500 lb. |

**Can a forklift tip over without a load?**

CAN A FORKLIFT TIP-OVER WITHOUT A LOAD? A forklift can become unstable, even if it does not have a load. For example, if a driver turns too fast around a sharp curve, their lift can tip. Or, if a driver is traveling on an unbalanced surface, their lift can tip if it shifts too far in one direction.

## What happens when load Centre increases?

The weight capacity of a forklift attachment is tied to what is known as the Maximum Load Moment, which is when the load center distance increases, changing the weight distribution, and as a result, the amount of weight a truck can carry under those conditions.