## What is the best error correction code?

Hamming code or Hamming Distance Code is the best error correcting code we use in most of the communication network and digital systems.

### What is double error-correcting code?

By 100% correction we mean that when the two bits of information (k=2) is transmitted simultaneously over the noisy channel and if the two bits are in the error, in the received vector, then this code can detect and correct errors up to two bits thus recovering both the two bits of information.

**Which codes are used in correcting errors bar?**

Reedâ€“Solomon coding is very widely used in mass storage systems to correct the burst errors associated with media defects. This code can correct up to 2 byte errors per 32-byte block.

**What are the types of error correcting codes?**

There are three major types of error correction.

- Automatic repeat request (ARQ)
- Forward error correction.
- Hybrid schemes.
- Minimum distance coding.
- Repetition codes.
- Parity bit.
- Checksum.
- Cyclic redundancy check.

## Which can detect 2 bit errors?

9. Which can detect two bit errors? Explanation: CRC is more powerful and it can detect various kind of errors like 2 bit errors.

### Can Hamming code detect 2 bit errors?

Hamming codes can detect one-bit and two-bit errors, or correct one-bit errors without detection of uncorrected errors. By contrast, the simple parity code cannot correct errors, and can detect only an odd number of bits in error.

**Which code needs more check bits?**

2. Which needs more check bits? Explanation: Error correction needs more check bits where as error detection needs less check bits.

**How do you correct errors?**

Dos

- Be sensitive to your students’ needs and preferences. Ask your students at the beginning of your course which kind of error correction they prefer.
- Be kind and patient in the way you correct.
- Give your students a chance to self-correct, or apply peer-correction in your classroom.
- Use visual cues.

## How do you solve double error detection?

Hamming Code for double error detection The Hamming code can be modified to correct a single error and detect double errors by adding a parity bit as the MSB, which is the XOR of all other bits.

### How many ECC bits do I need?

Five ECC bits are needed to protect each eight-bit word, six for 16-bit words, seven for 32-bit words and eight for 64-bit words.

**What is an error-correcting code explain?**

An error-correcting code is an algorithm for expressing a sequence of numbers such that any errors which are introduced can be detected and corrected (within certain limitations) based on the remaining numbers.