What is Section 3 of the MSDS?

What is Section 3 of the MSDS?

Section 3 – Composition/information on ingredients identifies the ingredient(s) contained in the product indicated on the SDS, including impurities and stabilizing additives. This section includes information on substances, mixtures, and all chemicals where a trade secret is claimed.

Is liquid nitrogen considered hazardous?

Nontoxic, but may cause suffocation by displacing the oxygen in air. Exposure to oxygen-deficient atmosphere (<19.5%) may cause dizziness, drowsiness, nausea, vomiting, excess salivation, diminished mental alertness, loss of consciousness and death.

Is dexron 3 flammable?

Specific hazards Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2). No unusual fire or explosion hazards noted. Hazardous combustion products Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.

Is un1263 hazardous?

UN 1263 Flammable Liquid Placard — Paint Pre-printed with a UN Number, these Hazard Class 3 placards meet the requirements of 49 CFR 172.500 for domestic and international shipments of hazardous materials by highway, rail and water. Your compliance is our top priority.

What meant by TLV in MSDS?

The threshold limit value (TLV) is believed to be a level to which a worker can be exposed per shift in the worktime without adverse effects. Strictly speaking, TLV is a reserved term of the American Conference of Governmental Industrial Hygienists (ACGIH).

What is the new name for MSDS?

As a reminder, effective June 1, 2015, all Material Safety Data Sheets (MSDS) must be replaced with new Safety Data Sheets (SDS).

Is liquid nitrogen safe to breathe?

Although nitrogen is nontoxic and inert, it can act as a simple asphyxiant by displacing oxygen in air to levels below that required to support life. Inhalation of nitrogen in excessive amounts can cause dizziness, nausea, vomiting, loss of consciousness, and death.

How can liquid nitrogen be used safely?

Prudent Safety Practices

  1. Liquid nitrogen should be handled in well-ventilated areas.
  2. Handle the liquid slowly to minimize boiling and splashing.
  3. Do not transport liquid nitrogen in wide-mouthed glass Dewars or Dewars not protected with safety tape.
  4. Use only approved containers.

What happens if you drink transmission fluid?

Aspiration, which is the passage of fluid into the lungs, may occur when accidentally swallowing one of these products, or if they are vomited. This is especially a risk with fuels and solvents. This may result in chemical pneumonia.

Is transmission fluid toxic to humans?

Not expected to be harmful to internal organs if absorbed through the skin. Ingestion: Not expected to be harmful if swallowed. Inhalation: Not expected to be harmful if inhaled. Contains a petroleum-based mineral oil.

What is the placard 1263?

1263 Placard – Class 3 Flammable Liquid.

Is the information provided in this safety data sheet correct?

Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,

What is the product name for 1 1 3 3 tetramethyldisiloxane?

Identification Product Name 1,1,3,3-Tetramethyldisiloxane Cat No. : AC216510000; AC216510250; AC216511000; AC216515000 CAS-No3277-26-7 SynonymsNo information available

Are there any hazardous reactions to LD50?

Hazardous ReactionsNone under normal processing. 11. Toxicological information Acute Toxicity Product Information Component Information Component LD50 Oral LD50 Dermal LC50 Inhalation Disiloxane, 1,1,3,3-tetramethyl- 3 g/kg (Mouse) Not listed 400 mg/l/2h (Mouse) Toxicologically Synergistic Products No information available