What does Stfu mean and YK?

What does Stfu mean and YK?

Summary of Key Points

Definition: Shut The F*ck Up
Type: Abbreviation
Guessability: 2: Quite easy to guess
Typical Users: Adults and Teenagers

What are the 4 basic components of an engineering drawing?

The main purpose of engineering drawings is to communicate to other engineers, machinists, etc….Dimensions have four basic components:

  • Dimension Text.
  • Dimension Line andArrows.
  • Extension Lines.
  • Gap.

What are inspection dimensions?

Inspection dimensions are used to mark what dimensions the Quality Dept. have to measure on a part /assembly, in conjunction with the geometric tolerences. Anyone I have worked for as a rule does not use the inspection dims, which by default means that all dimensions shown on a drawing must be checked.

What does AFF mean?

The abbreviation AFF has a number of common meanings, which are used widely both online and off. The most common definition searched for is “Adult Friend Finder.” AFF also means “Affirmative,” “Advanced Fighting Fantasy” and “Away From Forum.” Here is a little more information about each definition of AFF.

What does PL mean on a drawing?

Parts list A list

What does a n mean?


Acronym Definition
A/N Army/Navy
A/N Alphanumeric
A/N Author’s Note
A/N Action Needed

What does REF mean in a drawing?

reference dimensions

How do you identify reference dimensions?

The method for identifying a reference dimension (or reference data) on drawings is to enclose the dimension (or data) within parentheses. See Figs. 1-19 and 1-20. Where an overall dimension is specified, one interme- diate dimension is omitted or identified as a reference dimension.

What are the 3 types of tolerances?

A tolerance is an acceptable amount of dimensional variation that will still allow an object to function correctly. Three basic tolerances that occur most often on working drawings are: limit dimensions, unilateral, and bilateral tolerances.

What is basic dimension example?

A basic dimension is the description of a theoretically exact size or location. Instead a separate control is specified on the drawing that utilizes the basic dimension. An example of this would be a true position callout for a hole or set of holes. The basic dimension(s) specify the location of the hole.

What does CC mean in drawings?

Engineering drawing abbreviations and symbols

Abbreviation or symbol Definition
C-C or C-TO-C centre-to-centre; on centres
CBN cubic boron nitride
CDA current design activity
CERT or cert certification

What is basic dimension in drawing?

In a technical drawing, a basic dimension is a theoretically exact dimension, given from a datum to a feature of interest. Allowable variations from the theoretically exact geometry are indicated by feature control frames, notes, and tolerances on other non-basic dimensions.

What does DP mean in construction?

House plan abbreviations

DG Double glazing
DH Double hung (windows)
DP Downpipe
DPC / DPM Damp-proof course / damp-proof membrane

What is DWL in texting?

DWL means “Dying with Laughter”. The abbreviation DWL is an expression of excessive hilarity, meaning you are laughing so much you might die from the effort. Similar phrases include ROFL (Rolling On Floor Laughing) and ROFLCOPTER (Rolling On Floor Laughing, Rotating Around Like A Helicopter).

What is author’s note?

An author’s note is an opportunity for you to speak directly to your readers about your work. It explains what you created and why you made it. It should also contain a reflection on what you have learned and how you have grown as a writer.

What does CC mean construction?

C/C in Construction

6 C/C Center to Center + 1 variant Architecture, Construction Drawing,
3 c/c Center To Center Engineering, Architectural
4 C/C Centre to Centre + 1 variant Architecture, Civil Engineering, Engineering
3 C/C Centre To Centre Technology, Drawing, Design

What is Iykyk?

IYKYK – If You Know, You Know.

What does YK YK mean?

You’re Kidding

What are typical dimensions?

The term “typical,” when associated with a dimension or feature, means that this dimension or feature applies to the locations that appear to be identical in the size and configuration. The tolerance stated for a dimension labeled “typical” also applies to each identical feature.

What is the abbreviation for author?

Abbreviation for Author

8 AUT Author
1 AR Author Hand, Anatomy, Medical
1 AU Author Libraries, Books, Reading
1 Auth author
1 auth Author

What is DBL in hotel?

DBL stands for double, TPL stands for triple, QUAD stands for quad, SGL stands for single. This is the occupancy level of the hotel room.

What does DBL stand for?

What does DBL stand for?

Rank Abbr. Meaning
DBL Database Language
DBL Distance Between Lenses
DBL Don’t Be Late
DBL Domain Block List

What are the GD symbols?

GD Symbols

  • True Position. Position is one of the most useful and most complex of all the symbols in GD.
  • Regardless of Feature Size.
  • Least Material Condition (LMC)
  • Maximum Material Condition (MMC)
  • Datums in GD.
  • Perpendicularity.
  • Total Runout.
  • Flatness.

What does a n mean Wattpad?

authors note

What is the abbreviation for note?


What does RR mean in a text?

“Restroom” is the most common definition for RR on Snapchat, WhatsApp, Facebook, Twitter, and Instagram. RR. Definition: Restroom.

Whats CC stand for in emails?

carbon copy