How much is a millermatic 210 worth?
A Miller Millermatic 210 Phase 1 Welder, Stock #907046, SN #LC389091….How much is a millermatic 210 worth?
|210 Mig Welder + EXTRAS MILLERMATIC 210|
|View Bid History|
Is the millermatic 210 a good welder?
It delivers what it promises and comes from a reputable company with a long history of great welding products. It comes with virtually everything you need to weld except gas and wire and it has a great warranty! Plain and simple, you can’t go wrong with investing in a Millermatic 210! It will be well worth it.
How many amps does a millermatic 210 draw?
Rated at 150 amps, 60% duty cycle with 20 ft (6 m) cable assembly. Extends Spoolmate 3035 an additional 25 ft (7.6 m) from power source.
Can a Miller 210 weld aluminum?
In this article, we used the SpoolMate 3035 in conjunction with a Millermatic 210 welder. This setup can weld aluminum as thick as 3/8 inch in a single pass. The system and setup is easy, and with Miller’s Gun-On-Demand system, you can hook up two gas bottles and both guns and simply use whichever the job requires.
When did they stop making the millermatic 210?
As of April 2011, the Millermatic 210 is no longer a current model.
How many amps does a Miller 211 pull?
Rated at 150 amps, 60-percent duty cycle. Includes 20-foot (6.1 m) cable assembly.
How much does a Miller 210 weigh?
Looking for more? Browse our entire selection of welding machines!
|Title||Dynasty® 210 120-480 V|
|Net Weight||47 lbs|
|Weldable Metals||Aluminum Specialty Metals Mild Steel Stainless Steel|
|Net Width||8.6 in|
|Warranty||Miller’s True Blue Warranty|
What is the duty cycle on a Miller 211 welder?
Miller® Millermatic® 211 MIG Welder, 110 – 240 Volt 150 Amps 21.5 Volts At 40% Duty Cycle (240 V), 115 Amps 19.8 Volts At 20% Duty Cycle (120 V) Single Phase 38 lbs.
How many amps do I need for my welder?
A welder running on 208 – 230V primary requires a minimum breaker size of 30A with 50A recommend (this would be for welding at up to 180 amps). Welding at an output of 200 amps or more requires at least a 50A breaker….Buying your First Welder.
Can you weld aluminum with a millermatic 250?
Subject: RE: Using a millermatic 250 to weld aluminum? You will want straight Argon for aluminum, 30A should be correct for spool gun, you will need the 14 pin connector / card as posted above for the welder. I use more 5356 wire than 4043, as the 5356 has better strength in the weld.
What year was the millermatic 250 made?
The Millermatic 250 is an older MIG / Flux Core welder produced from 1991 to 2001. It may have either analog or digital readouts depending on model year. It was replaced by the 251 then the 252.
Where can I find a Miller MIG welding catalog?
www.MillerWelds.com Millermatic 210 And M-25 Gun Flux Cored (FCAW) Welding MIG (GMAW) Welding Miller Electric manufactures a full line of welders and welding related equipment. For information on other quality Miller products, contact your local Miller distributor to receive the latest full line catalog or individual catalog sheets.
What is a machine Miller product?
MILLER PRODUCTS ARE INTENDED FOR PURCHASE AND USE BY COMMERCIAL/INDUSTRIAL USERS AND PERSONS TRAINED AND EXPERIENCED IN THE USE AND MAINTENANCE OF WELDING EQUIPMENT.
Is there an owner’s Manual for Miller tools?
Today, the people that build and sell Miller products continue the tradition. They’re just as committed to providing equipment and service that meets the high standards of quality and value established in 1929. This Owner’s Manual is designed to help you get the most out of your Miller products.
Where can I find the nearest Miller distributor?
To locate your nearest distributor or service agency call 1-800-4-A-Miller, or visit us at www.MillerWelds.com on the web. Thank you and congratulations on choosing Miller.