How much does a 396 big block cost?
How Much Is A 396 Big Block Worth? Compared to the current price of a forged GM crank ($200 to $400), a forged 454 crank is $75 to $100. A rebuildable 396 short-block will typically cost less than $200, in most cases. A short-block can fetch around $500, while a lot more than 500.
Is a Chevy 396 a good engine?
The 396 is a good revving engine, so you’d want to run a steel crank so it would live at the rpm you’d have to run it to make HP. And probably a roller cam, as flat tappet cams in big blocks have a nasty habit of “going away” relatively easily.
Was there ever a 396 in a Corvette?
It was the high “state-of-tune” that made the Corvette’s L78 engine produce 425hp with 396 cubic-inches. It was introduced mid-1965 and produced more horsepower than any of the other 396 engines manufactured from mid-1965 until 396 production ended.
Is a Chevy 396 a big block?
The earliest production big-block Chevy appeared as the 396 and bolted into the new-for-’65 full-size Impalas as well as in the Corvette. There were even a precious few ’65 Z-16 SS396 Chevelles built in 1965. This was enhanced in 1966 with multiple horsepower combinations of the 427 as high as 425 horsepower.
How much does it cost to rebuild a 396 big block?
A typical job entails about 10-20 hours to complete. By adding these factors together, you’re looking at a total cost between $500 and $2,000 per person. In general, it costs between $2,500 and $4,500 to rebuild an engine.
How much horsepower does a 396 have?
With 425 hp at 5,800 rpm and 445.4 lb-ft at 3,600 rpm, we are a full 50 hp higher than showroom claims….Chevrolet Lied! Stone-Stock 1969 L78 396 Big-Block Makes 50 HP More Than Factory Rating.
| Dyno Results | Torque (lb-ft) | HP |
|---|---|---|
| 5,600 | 396 | 422.2 |
| 5,700 | 390.6 | 423.8 |
| 5,800 | 384.7 | 425 |
| 5,900 | 375.4 | 422.3 |
Whats better 396 or 454?
The 454 was a better engine for power than the 396, some feel that the 396 had a weak crank for real horsepower usage. It’s hard to outrun cubic inches, no replacement for displacement.
Are 396 and 454 blocks the same?
The blocks are the same with the exception of the bore of the cylinder when the cast was made. The walls will not allow for that much bore. If you wish to use the 454 crank and rods with the 396 block you can purchase a set of pistos with the corrocponding compression hieght and have a stroker 421 CI engine.
What year Corvette came with a 396 engine?
1965
The L78 engine was introduced in 1965 as the first big-block engine in the Corvette lineup. This 396 “Turbo Jet” was $556.65 over the base $4,321.00 price of a standard Coupe and was offered in 1965 only….In Detail.
| type | Series Production Car |
|---|---|
| 0 – 100 mph | ~13.4 seconds |
| 0 – 1/4 mile | ~14.1 seconds |
What year did the 396 engine come out?
The 396 cu in (6.5 L) V8 was introduced in the 1965 Corvette as the L78 option and in the Z16 Chevelle as the L37 option.