How do I fix E1 error on my boiler?
Why is my Boiler Flashing E1? This is a lesser-known boiler error code but if displayed, it means the pressure on your boiler has dropped and a water leak is stopping your system from functioning properly. In this case, you will have to repressurise your system to fix this problem.
What does E1 mean on my Potterton boiler?
E1. Overheat. Bleed radiators, check system water pressure; if low refill via filling loop.
What does code e mean on boiler?
E-Error Codes The E+3 numbers (like E110) is normally a fault that can be resolved by the homeowner. Popular ones include E110, E125, E131, which indicate overheating. Simply bleed the radiators to resolve this one.
How do I reset my Potterton boiler?
- Reset. bar.
- Off position. The boiler will not operate.
- Central heating. and hot water. Both heating and. hot water will operate.
- Hot water. Hot water will operate.
- Reset. Hold for approximately. 5 seconds and release.
What does E1 33 mean on a Potterton boiler?
E133. Indicates that the gas supply has been interrupted, ignition has failed or the flame has not been detected. Ensure that the gas supply has not been turned off, and turn the selector switch to the reset position and hold for at least 5 seconds.
What does Error 1 mean on a boiler?
low water pressure
The F1 error code is displayed when your Ideal boiler has low water pressure, resulting in the boiler locking out and halting its normal operation. Ideal officially defines the F1 fault code as low water pressure. As the name implies, this is typically caused by low pressure within the central heating system.
How do I fix E1 33 error on my boiler?
If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen.
- Switch your boiler off at the control panel, and turn off the electricity at the wall.
- Find where the pipe is frozen, usually the most exposed part of the pipe.
What does E1 10 mean on a boiler?
E110. Displayed overheat of the primary water or flue system has occurred. Turn the selector switch to the reset position and hold for at least 5 seconds. If the boiler does not relight, or the code is displayed regularly contact your installer or Baxi Customer Support.
Why does my Potterton boiler need resetting?
If you find that you keep having to reset your boiler, it’s likely that there could be a fault with your heating system. This fault could eventually lead to a more serious issue such as a boiler breakdown, so it’s best to seek out a solution as soon as possible.
Why does my Potterton boiler not firing up?
Like most boilers, fan faults like this on a Potterton can be narrowed down to: Loose or damaged wiring – the PCB isn’t receiving the signal it needs. A faulty air pressure switch – the switch is sending the wrong signals to the boiler.
Why does my boiler say E1 33?
If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen. Warm the condensate pipe across its exposed length using either a hot water bottle, a microwaveable heat pack or warm water poured from a watering can.
What does E1 error code mean on Potterton combi boiler?
We have a Potterton Combi boiler (I’m not sure which model exactly), and it’s repeatedly losing pressure. An ‘E1 error’ code appears, and the hot water in the whole house goes down. In order to get the hot water back on, the boiler has to be reset.
Does your Potterton boiler have a fault code?
Your Potterton boiler is one of the most technical appliances in your home. It is also one that you may take for granted until something goes wrong. Luckily, boilers are clever enough to provide clues to the problem in the form of fault codes. Here we run through them all and what they mean. What does my Potterton Boiler Fault Code mean?
What does E133 mean on a Potterton boiler?
If you are seeing the error code E133 on your Potterton boiler, this means that your boiler condensate pipe is frozen. A frozen condensate pipe is something that can be fixed quite easily yourself if you feel confident enough. There are a few ways you can thaw a pipe out yourself without having to call an engineer.
What do I do if my boiler displays error E110?
POSSIBLE FAULT USER ACTION E20, E28, E50 and E160 Faulty components Make a note of the displayed error and contact your boiler engineer. E110 Displayed overheat of the primary water or flue system has occurred