How do I create a gear profile in SOLIDWORKS?

Blog

How do I create a gear profile in SOLIDWORKS?

Step 1:

  1. Open SW, then create a new document and choose Front Plane and sketch.
  2. Draw a 3x circule from the centre for construction.
  3. Select Centerline and drav 4 lines, like in the photo.
  4. Select a 3 PointArc and draw a line from the 2. to the 3.

How do you create a reference dimension in SOLIDWORKS drawing?

To add a reference dimension:

  1. Click Smart Dimension. (Dimensions/Relations toolbar) or click Tools > Dimensions > Smart.
  2. In a drawing view, click the items you want to dimension. You can dimension to a silhouette edge.
  3. Use rapid dimensioning to place evenly spaced dimensions.

How do you add a CG to a SOLIDWORKS drawing?

To insert a center of mass:

  1. In a drawing, click Insert > Model Items.
  2. In the Model Items PropertyManager, under Reference Geometry, click Center of Mass .
  3. Click . You can create dimensions between the center of mass points and geometric entities using any of the dimensioning methods.

How do you add dimensions to a drawing?

You can specify that dimensions marked for drawings be inserted automatically into new drawing views. Go to Tools > Options and in the Document Properties tab, click Detailing. Select Dimensions marked for drawing under Auto insert on view creation.

How do I create a template in SOLIDWORKS?

To create a template:

  1. Click New (Standard toolbar) or File > New.
  2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
  3. Click Options.
  4. On the Document Properties tab, select options to customize your new document template, then click OK.
  5. Click File > Save As.

How do you draw a cross section in SOLIDWORKS?

To create a section view manually:

  1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section.
  2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
  3. Sketch a section line.
  4. Click to place the view.

How do you use smart dimension in SOLIDWORKS?

To add a dimension to a sketch or drawing:

  1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart.
  2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc.
  3. Click to place the dimension. To dimension the…

How do you dimension in Solidworks?

Dimensioning a 2D Sketch

  1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. The default dimension type is Parallel.
  2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc.
  3. Click to place the dimension. To dimension the…

How is a reference dimension shown on a drawing?

Reference dimensions are shown on a drawing as a value enclosed in parentheses. An alternate method is to follow the dimension with “Reference” or “Ref”. The use of “Ref” or enclosing the dimension inside parentheses are by far the most common notations used.